TM-9-2320-361-24-2

2-1/2 TON, 6X6, M44A2 SERIES TRUCKS

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE PART 2 OF 2

AUGUST 2006

TM-9-2320-361-24-2 - Page 888 of 1144

TM 9-2320-361-24-2

0433 00

0433 00-4

PERSONNEL HEATER OVERHEAT SWITCH AND RECEPTACLE REPLACEMENT (Contd)

RECEPTACLE INSTALLATION

1.

Install receptacle (15) on bracket (8) with four new screw-assembled lockwashers (1).

2.

Install receptacle ground lead (14) on stud (9) with nut (4).

3.

Install leads (16) and (7) on flame detector switch (11) with new screw-assembled lockwashers (5)

and (6).

4.

Install receptacle lead (12) on overheat switch (10) with new nut-assembled lockwasher (13).

5.

Install restriction solenoid lead (3) on receptacle (15) with new screw-assembled lockwasher (2).

OVERHEAT SWITCH INSTALLATION

1.

Install overheat switch (21) on heater housing (19) with two screw-assembled lockwashers (20).

2.

Install ignition control lead (22), thermostat lead (23), and receptacle lead (24) on overheat

switch (21) with new nut-assembled lockwasher (25).

3.

Install shutoff valve lead (18) on overheat switch (21) with new nut-assembled lockwasher (17).

4.

Install personnel heater guard (WP 0427 00).

5.

Connect battery ground cable (WP 0126 00).

6.

Release parking brake and remove wheel chocks (TM 9-2320-361-10).