TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 105 of 764
TM 9-2320-361-34
3-17. INTAKE AND EXHAUST MANIFOLDS MAINTENANCE
(Contd)
d. Exhaust Manifold Assembly
1. Install six new flange seal rings (14) on manifold sections (13) and (15).
2. Install manifold sections (13) and (15) in manifold section (17).
3. Install two plugs (16) in exhaust manifold sections (13) and (15).
e. Intake and Exhaust Manifolds Installation
1.
2.
3.
4.
5.
6.
Position two gaskets (4) on thirty studs (3).
NOTE
Assistant will help with steps 2 and 3.
Install exhaust manifold (10) on twelve studs (3) and cylinder head (1) with twelve washers (11) and
new locknuts (12). Do not tighten locknuts (12).
Hold exhaust manifold (10). Install intake manifold (5) on cylinder head (2) with sixteen washers (6)
and nuts (7),
Tighten twelve locknuts (12).
Install plug (9) and drain valve (8) on intake manifold (5).
Tighten two screws (18) on starter solenoid bracket (19).
3-54
Back to Top
