TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 136 of 764

TM 9-2320-361-34

5-3. FUEL INJECTOR TUBES MAINTENANCE

(Contd)

6. Remove nut (11),lockwasher (12), two retiner

halves (17), and

washer (9) from

stud(l3).

7. Remove six locknuts (27), ten retainers (8), eight cushion halves (7), six washers (9), and

screws (10) from fuel injector tubes (4), (5), and (6). Discard six locknuts (27).

8. Lift three dust caps (16) for fuel injector tubes (4), (5), and (6).

9. Loosen three nuts (15) and remove fuel injector tubes (4), (5), and (6) from fuel injector pump (14).

10. Loosen three nuts (26) and remove three fuel injector tubes (4), (5), and (6) from injector nozzles (3).

b.

Inspection

1. Inspect injector tubes (4), (5), (6), (21), (22), and (24) for cracks, bends, or damaged flaring. Replace

if cracked, bent, or damaged.

2. Inspect six dust caps ( 16) for damage. Using fabricated tool, replace dust

caps (16)

if

damaged.

5-5