TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 127 of 764

TM 9-2320-361-34

I

3-18. ENGINE REPLACEMENT

(Contd)

50. Remove screw-assembled lockwasher (8) and lockwasher (6) from transmission (5) and install

lockwasher (6) and ground strap (7) on transmission (5) with screw-assembled lockwasher (8).

Tighten screw-assembled lockwasher (8) 23-26 lb-ft (31-35 N.m).

51. Remove screw (4) from engine (1) and install washer (2) and ground strap (3) on engine (1) with

screw (4).

FOLLOW-ON TASKS:

●

Install air cleaner assembly (TM 9-2320-361-20).

●

Install transmission gearshift lever (TM 9-2320-361-20).

●

Install radiator and brackets (TM 9-2320-361-20).

●

Install cab tunnel panel (TM 9-2320-361-20).

●

Install front winch propeller shah, if equipped (TM 9-2320-361-20).

●

Install propeller shaft (TM 9-2320-361-20).

●

Fill

engine crankcase

to proper

oil level (LO 9-2320-209-12-1).

●

Adjust hand throttle control cable (TM 9-2320-361-20).

●

Adjust engine stop control cable (TM 9-2320-361-20).

●

Adjust accelerator linkage (TM 9-2320-361-20),

●

Adjust clutch control linkage (TM 9-2320-361-20).

●

Connect battery ground cable (TM 9-2320-361-20).

3-76