TM 9-2320-361-34
3-18. ENGINE REPLACEMENT
(Contd)
41. Install
swivel (7) on pump lever (1) with pin (9) and new cotter pin (2).
42. Insert throttle control cable (5) through flange on accelerator rod (6) and install with connector (4)
and screw (3). Do not tighten screw (3). Position connector (4)
1/8
in. (3 mm) from flange on
accelerator rod (6) and tighten screw (3).
43. Install throttle
return spring (8) on swivel (7) and throttle return clip (10).
44. Insert cable control wire (16) through swivel (14). Do not tighten screw (15).
45. Install clamp (12) on fuel injector pump (13) with new lockwasher (17) and screw (11).
\
3-74