TM-9-2320-361-34

2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE

MAY 1992

TM-9-2320-361-34 - Page 153 of 764

TM 9-2320-361-34

a. Disassembly

7-2. 60 AMPERE ALTERNATOR REPAlR(Contd)

NOTE

Tag leads for assembly.

1. Remove access plug (7) from endhousing (4).

2. Remove six screws (1), end cover (2), and O-ring (3) from end housing (4). Discard O-ring (3).

NOTE

Regulator is part of end cover; do not disassemble.

3. Disconnect three leads (10) from three terminals (11) on regulator (12).

4. Remove two screw-assembled lockwashers (6) and output plate cover (5) from end housing (4).

Discard screw-assembled lockwashers (6).

5. Remove sealer from three stator leads (8).

CAUTION

Use heat sink when resoldering leads. Failure to do so may result

in damage to equipment.

6. Desolder and disconnect three stator leads (8) from three stator lead terminals (9).

7-2