TM-9-2320-361-34
2-1/2-TON, 6x6, M44A2 SERIES TRUCKS (MULTIFUEL)
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE
MAY 1992
TM-9-2320-361-34 - Page 307 of 764
TM 9-2320-361-34
14-4. WINDSHIELD GLASS REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
All
REFERENCES (TM)
TM 9-2320-361-20
TOOLS
TM 9-2320-361-34P
General mechanic’s tool kit
(Appendix B, Item 1)
EQUIPMENT CONDITION
.
Windshield assembly removed (TM 9-2320-361-20).
MATERIALS/PARTS
●
Windshield arm, glass, and handle removed
Two lockwashers (Appendix F, Item 139)
(TM 9-2320-361-20).
Filler strip (Appendix F, Item 264)
Filler strip (Appendix F, Item 265)
Adhesive (Appendix C, Item 1)
a. Removal
1. Remove six screws (1), two nuts (4), four washers (9), and two lockwashers (3) from windshield
frame (8). Discard lockwashers (3).
2. Remove crosspiece (2) from windshield frame (8).
NOTE
Measure old frame filler strips for installation.
3. Remove
crosspiece
filler
strip
(5) from crosspiece (2). Discard crosspiece filler strip (5).
4. Remove
glass (6) and frame filler strips (7) from windshield frame (8). Discard frame filler
strips (7).
b. Installation
NOTE
Cut four new filler strips to size.
1. Apply
adhesive
to new frame filler strips (7). Install new frame filler strips (7) on glass (6).
2.
Install
glass
(6)
in
windshield
frame
(8).
Tap glass (6) gently into position.
3. Apply
adhesive
to
new crosspiece filler strip (5). Install new crosspiece filler strip (5) on glass (6).
4. Install crosspiece (2) on windshield frame (8) and gently tap until screw holes aline.
5. Install
crosspiece
(2)
on windshield frame (8) with six screws (1), four washers (9), two new
lockwashers (3), and nuts (4). Trim excess filler strips (7) and (5) and adhesive from around
glass (6).
14-2
Back to Top
