TM-9-2320-362-14-P

TRUCK UTILITY: S250 SHELTER CARRIER, 4X4, M1037 FOR TRAFFIC JAM AN/TLQ-17A(V)3 (HMMWV)

TECHNICAL MANUAL; OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ELECTRICAL ENVIRONMENTAL SYSTEM (EES)

APRIL 1992

TM-9-2320-362-14-P - Page 118 of 353

TM 9-2320-362-14&P

4-8. CIRCUIT BREAKER REPLACEMENT (COnt’d)

1.

Install bus bar (19) on load side of circuit breaker (18) and

secure with two lockwashers (22) and screws (21).

2.

Install bus bar (11) on line side of circuit breaker (18) and

secure with washer (10), lockwasher (9), and screw (8).

3.

Install circuit breaker (18) into power interface box (4).

4.

Install boot (1) and guard (2) onto power interface box (4) and

secure with four washers (24), lockwashers (25), and screws (26).

5.

Secure bus bar (11) to terminal 11E4 (3) with washer (15),

lockwasher (16), and nut (17).

6.

Secure wire assembly lead (13), bus bar (23), and bus bar (19),

with washers (14), screw (12), and nut (20).

7.

Install gasket (5) and cover (7) on power interface box (4) and

secure with sixteen screws (6).

4-6