TM-9-2320-362-14-P
TRUCK UTILITY: S250 SHELTER CARRIER, 4X4, M1037 FOR TRAFFIC JAM AN/TLQ-17A(V)3 (HMMWV)
TECHNICAL MANUAL; OPERATOR, UNIT, DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL INCLUDING REPAIR PARTS AND SPECIAL TOOLS LIST FOR ELECTRICAL ENVIRONMENTAL SYSTEM (EES)
APRIL 1992
TM-9-2320-362-14-P - Page 326 of 353
TM 9-2320-362-14&P
Section II. ILLUSTRATED MANUFACTURING INSTRUCTIONS (Cont’d)
MATERIAL BLOCK
STOCK SIZE DESCRIPTION SPECIFICATION
NO. 20 AWG
WIRE, INSULATED
TYPE E, WHT
WIRE ASSEMBLIES
WIRE ASSEMBLY
CUT LENGTH MANUFACTURED FROM TERMINAL LUG
PART NUMBER
(INCHES) PART NUMBER (CAGE) PART NUMBER (CAGE)
C5136333 7-29/32 M16878/4BGE9 MS25036-151
(81349) (96906)
C5136332 12-1/2 M16878/4BGE9 MS25036-105
(81349)
(96906)
Figure E-2.
Wire Assemblies
INSTRUCTIONS:
1.
Determine wire assembly part number needed from RPSTL and cut to
length as shown.
2.
Strip insulation 1/4-inch from end of wire.
3.
Place terminal lug over end of wire and crimp in place.
E-3
Back to Top
