TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 1091 of 1760

TM 9-2320-365-20-1

TM 9-2320-365-20-1

TM 9-2320-365-20-1

TM 9-2320-365-20-1

TM 9-2320-365-20-1

2-705

2-705

2-705

2-705

2-705

VOLTAGE TEST

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuit

and cause severe burns or electrical shock.

WARNING

(1)

Raise cab (TM 9-2320-365-10).

(2)

Disconnect connector P23 (LH composite front

light assembly) or P9 (RH composite front

light assembly) from composite front light

assembly connector.

(3)

Lower cab (TM 9-2320-365-10).

(4)

Connect positive (+) probe of multimeter to

connector P23 (LH composite front light

assembly) or P9 (RH composite front light

light assembly).

(5)

Connect negative (-) probe of multimeter to

ground.

(6)

Position main light switch to STOPLIGHT

(TM 9-2320-365-10).

(7)

Position turn signal switch to left turn or

right turn position (TM 9-2320-365-10)

and note reading on multimeter.

(8)

If 12 vdc is not present, go to step 4 of this

fault.

(9)

Position turn signal switch to off

(TM 9-2320-365-10).

(10)

Position main light switch to OFF

(TM 9-2320-365-10).

(11)

Raise cab (TM 9-2320-365-10).

(12)

Connect connector P23 (LH composite front

light assembly) or P9 (RH composite front light

assembly) to composite front light assembly

connector.