TM-9-2320-365-20-1
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-1 - Page 1097 of 1760
CONTINUITY TEST
(1)
Position master power switch to on
(TM 9-2320-365-10).
(2)
Position main light switch to STOPLIGHT
(TM 9-2320-365-10).
(3)
Apply brakes and observe stoplights.
(4)
If both stoplights do not
illuminate, go to step 5 of this fault.
(5) Position main light switch to OFF
(TM 9-2320-365-10).
(6)
Position master power switch to
off (TM 9-2320-365-10).
(1)
Loosen six screws on composite taillight
assembly cover.
(2)
Remove cover and preformed packing from
housing.
Discard preformed packing.
(3)
Remove lamp from socket.
(4)
Set multimeter to ohms.
(5)
Check continuity through lamp.
(6)
If continuity is not present, replace lamp
(para 7-32).
TM 9-2320-365-20-1
Change 1
2-711
Back to Top
