TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 1329 of 1760

TM 9-2320-365-20-1

CONTINUITY TEST

CONTINUITY TEST

Change 2

2-918.15

(1) Set multimeter to ohms.

(2) Connect positive (+) probe of multimeter

to connector P84 socket A.

(3) Connect negative (-) probe of multimeter

to ground and note reading on multimeter.

(4) If continuity is not present, repair wire 3032

from connector P84 socket A to terminal lug

TL85 (para 2-40) or replace start and

charging cable assembly (para 7-82).

(5) Connect connector P84 to air pressure

switch.

(1) Disconnect connector P110 from CTIS ECU.

(2) Remove kick panel (para 16-3).

(3) Disconnect connector P111 from connector

J111.

(4) Set multimeter to ohms.

(5) Connect positive (+) probe of multimeter to

connector P111 pin F.

(6) Connect negative (-) probe of multimeter to

connector P110 socket T and note reading

on multimeter.

(7) If continuity is not present, replace CTIS

cable assembly (para 7-53).