TM 9-2320-365-20-1
Change 2
2-918.9
(1) Disconnect connector P110 from CTIS ECU.
(2) Set multimeter to ohms.
(3) Connect positive (+) probe of multimeter to
connector P110 socket c.
(4) Connect negative (-) probe of multimeter to
connector P113 socket C and note reading on
multimeter.
(5) If continuity is not present, replace CTIS cable
assembly (para 7-53).
(1) Set multimeter to ohms.
(2) Connect positive (+) probe of multimeter to
connector P110 socket b.
(3) Connect negative (-) probe of multimeter to
connector P113 socket B and note reading on
multimeter.
(4) If continuity is not present, replace CTIS cable
assembly (para 7-53).
CONTINUITY TEST
CONTINUITY TEST