TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 561 of 1760

TM 9-2320-365-20-1

WARNING

VISUAL INSPECTION

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

Change 2

2-370.5

NOTE

All data on pages 2-370.6 through 2-370.9,

including pages 2-370.6 through d 2-370.9 deleted.

(1)

Remove Power Distribution Panel (PDP)

cover (para 16-2).

(2)

Remove circuit breaker CB79 from Power

Distribution Panl (PDP).

(3)

Install circuit breaker CB79 in Power

Distribution Panel (PDP).

(4)

Start engine (TM 9-2320-365-10).

(5)

Position master power switch to off (TM

9-2320-365-10).

(6)

Remove circuit breaker CB70 from Power

Distribution Panl (PDP).

(7)

If engine does not shut down when circuit

breaker CB70 is removed, replace relay K2

(para 7-9).

(8)

If engine shuts down when circuit breaker

CB70, replace master power switch

(para 7-18).

Perform step (9) if engine does not shut

down.

(9)

Press start inhibit switch.

(10) Install circuit breaker CB70 in Power

Distribution Panel (PDP).

(11) Install Power Distribution Panel (PDP)

cover (para 16-2).