TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 565 of 1760

CONTINUITY TEST

(1)

Set multimeter to ohms.

(2)

Connect positive (+) probe of multimeter to

connector PX2A socket 2.

(3)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4)

If continuity is not present, repair wire 3020

from connector PX2A socket 2 to connector

PX1A socket 2 (para 2-40) or replace

WTEC II dashboard cable assembly (para

7-10) or WTEC III dashboard cable assembly

(para 7-11).

(5)

If continuity is present, repair wire 1908

from connector PX2A socket 1 to connector

PX1A socket 1 (para 2-40) or replace

WTEC II dashboard cable assembly (para

7-10) or WTEC III dashboard cable assembly

(para 7-11).

(6)

Connect connector PX2A to lamp test

switch lamp base connector.

(7)

Install instrument panel assembly (para

7-15).

Use care when testing electrical connectors.

Do not damage connector pins or sockets

with multimeter probes.

Failure to comply

may result in damage to equipment.

CAUTION

Change 1

2-371

TM 9-2320-365-20-1