TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 697 of 1760

TM 9-2320-365-20-1

TM 9-2320-365-20-1

TM 9-2320-365-20-1

TM 9-2320-365-20-1

TM 9-2320-365-20-1

2-437

2-437

2-437

2-437

2-437

CONTINUITY TEST

(1)

Disconnect batteries (para 7-48).

(2)

Remove PDP cover (para 16-2).

(3)

Remove three screws and washers from PDP.

(4)

Remove three screws from PDP.

(5)

Lift PDP outward to gain access.

(6)

Connect positive (+) probe of multimeter to

TB1 position 41.

(7)

Connect negative (-) probe of multimeter to

TB1 position 42 and note reading on

multimeter.

(8)

If continuity is not present, repair wire 1580

from TB1 position 41 to TB1 position 42

(para 2-40) or replace WTEC II dashboard cable

assembly (para 7-10) or WTEC III

dashboard cable assembly (para 7-11).

(9)

If continuity is present, repair wire 1580 in

dashboard cable assembly (para 2-40) or

replace WTEC II dashboard cable assembly

(para 7-10) or WTEC III dashboard cable

assembly (para 7-11).

(10)

Install PDP on dashboard with three screws.

(11)

Install three washers and screws in PDP.

(12)

Install PDP cover (para 16-2).

(13)

Connect lighted indicator display to connector

PX7.

(14)

Position lighted indicator display in instrument

panel assembly with four screws.

(15)

Tighten four screws to 6-10 lb-in. (1 N·m).

(16)

Connect batteries (para 7-48).