TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 933 of 1760

CONTINUITY TEST

(1)

Remove nut, lockwasher, terminal lug TL20,

and lockwasher from RH marker light screw.

Discard lockwashers.

(2)

Connect positive (+) probe of multimeter to

terminal lug TL20.

(3)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(4)

If continuity is not present, repair wire 3095

from terminal lug TL20 to terminal lug TL21

(para 2-40) and go to step 6 of this fault if

required or replace rear lights cable assembly

(para 7-75) and go to step 1 of this fault.

(5)

If continuity is present, replace RH marker

light and go to step 6 of this fault if required.

(6)

Install lockwasher, terminal lug TL20,

lockwasher, and nut on RH marker light

screw.

(7)

Connect RH marker light connector to

connector P89.

Change 1

2-584.47

TM 9-2320-365-20-1