TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 925 of 1760

CONTINUITY TEST

(1)

Remove nut, lockwasher, terminal lug TL19,

and lockwasher from RH side marker light

screw.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

terminal lug TL19.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair wire 3095

from terminal lug TL19 to terminal lug TL20

(para 2-40) and go to step 6 of this fault if

required or replace rear lights cable assembly

(para 7-75) and go to step 1 of this fault.

(6)

If continuity is present, replace RH side

marker light (para 7-31) and go to step 5

of this fault if required.

(7)

Install lockwasher, terminal lug TL19,

lockwasher, and nut on RH side marker

light screw.

(8)

Connect RH side marker light connector to

connector P88.

Change 1

2-584.39

TM 9-2320-365-20-1