TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 917 of 1760

CONTINUITY TEST

(1)

Remove nut, lockwasher, terminal lug TL15,

and lockwasher from LH side marker light

screw.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

terminal lug TL15.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair wire 3094

from terminal lug TL15 to terminal lug TL16

(para 2-40) and go to step 5 of this fault if

required or replace rear lights cable

assembly (para 7-75) and go to step 1 of

this fault.

(6)

If continuity is present, replace LH side

marker light (para 7-31) and go to step 5

of this fault if required.

(7)

Install lockwasher, terminal lug TL15,

lockwasher, and nut on LH side marker

light screw.

(8)

Connect LH side marker light connector to

connector P85.

Change 1

2-584.31

TM 9-2320-365-20-1