TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 911 of 1760

CONTINUITY TEST

(1)

Remove nut, lockwasher, terminal lug TL16

and lockwasher from LH rear marker light

screw.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

terminal lug TL16.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair wire 3094

from terminal lug TL16 to ground (para 2-40)

and go to step 5 of this fault if required or

replace rear lights cable assembly

(para 7-75) and go to step 1 of this fault.

(6)

If continuity is present, repair wire 489 from

splice E15 to splice E16 (para 2-40) and

go to step 5 of this fault if required or

replace rear lights cable assembly

(para 7-75) and go to step 1 of this fault.

(7)

Install lockwasher, terminal lug TL16,

lockwasher, and nut on LH rear marker

light screw.

Change 1

2-584.25

TM 9-2320-365-20-1