TM-9-2320-365-20-1

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-1 - Page 919 of 1760

CONTINUITY TEST

(1)

Remove nut, lockwasher, terminal lug TL20

and lockwasher from RH rear marker light

screw.

Discard lockwashers.

(2)

Set multimeter to ohms.

(3)

Connect positive (+) probe of multimeter to

terminal lug TL20.

(4)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(5)

If continuity is not present, repair wire 3095

from terminal lug TL20 to terminal lug TL21

(para 2-40) and go to step 6 of this fault if

required or replace rear lights cable assembly

(para 7-75) and go to step 1 of this fault.

(6)

If continuity is present, repair wire 489 from

splice E15 to splice E17 (para 2-40) and

go to step 6 of this fault if required or replace

rear lights cable assembly (para 7-75) and

go to step 1 of this fault.

(7)

Install lockwasher, terminal lug TL20,

lockwasher, and nut on RH rear marker

light screw.

Change 1

2-584.33

TM 9-2320-365-20-1