TM-9-2320-365-20-1
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 1 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-1 - Page 995 of 1760
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
2-609
2-609
2-609
2-609
2-609
CONTINUITY TEST
CONTINUITY TEST
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
lamp socket.
(3)
Connect negative (-) probe of multimeter to
ground and note reading on multimeter.
(4)
If continuity is not present, repair wire 3091
(para 2-40) or replace front lights cable
assembly (para 7-74).
(1)
Set multimeter to ohms.
(2)
Connect positive (+) probe of multimeter to
inside of blackout drive light housing.
(3)
Connect negative (-) probe of multimeter to
lamp socket and note reading on multimeter.
(4)
If continuity is not present, replace blackout
drive light (para 7-30).
(5)
If continuity is present, replace lamp
(para 7-30).
(6)
Install lamp in socket.
(7)
Install gasket and cover on housing with
three screws.
Back to Top
