TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
TM 9-2320-365-20-1
2-611
2-611
2-611
2-611
2-611
CONTINUITY TEST
(1)
Remove main light switch (para 7-17).
(2)
Set multimeter to ohms.
(3)
Connect positive (+) probe of multimeter to main
light switch terminal F.
(4)
Connect negative (-) probe of multimeter to main
light switch terminal D.
(5)
Position main light switch to BO DRIVE
(TM 9-2320-365-10) and note reading on
multimeter.
(6)
If continuity is not present, replace main
light switch (para 7-17).
(7)
Position main light switch to OFF
(TM 9-2320-365-10).
(8)
Install main light switch (para 7-17).