TM-9-2320-365-20-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-2 - Page 353 of 1432

CONTINUITY TEST

TM 9-2320-365-20-2

Change 1

2-1407

(1) Set multimeter to ohms.

(2) Connect positive (+) probe of multimeter to

connector J119.

Refer to Table 2-22.

Main

Code 43 Sub Code 21 and 26 Low Side

Test Points.

(3) Connect negative (-) probe of multimeter to

connector J114 and note reading on

multimeter.

Refer to Table 2-22.

Main Code

43 Sub Code 21 and 26 Low Side Test

Points.

(4) Connect negative (-) probe of multimeter to

all other sockets in connector J114, one at a

time, and note reading on multimeter.

(5) Connect negative (-) probe of multimeter to

all sockets in connector J115, one at a time,

and note reading on multimeter.

(6) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(7) If continuity is not present in step 3, or

continuity is present in step 4, 5, or 6,

replace WTEC II cab transmission harness

(para 7-86).

Table 2-22.

Main Code 43 Sub Code 21 and 26 Low

Side Test Points

Sub

Code

Connector

J114

Connector

J119

21

26

1

H

A

10