TM-9-2320-365-20-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-2 - Page 427 of 1432

VOLTAGE TEST

WARNING

Change 1

2-1479

Remove rings, bracelets, watches, necklaces,

and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and

cause injury or short across electrical circuits

and cause severe burns or electrical shock.

TM 9-2320-365-20-2

(1) Remove instrument panel assembly for

access (para 7-15).

(2) Start engine (TM 9-2320-365-10).

(3) Set multimeter to volts DC.

(4) Disconnect connector J115 (top connector)

from WTEC II TEPSS.

(5) Connect positive (+) probe of multimeter

to connector J115-2.

(6) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(7) Connect positive (+) probe of multimeter

to connector J115-11.

(8) Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(9) If 12 to 14.5 vdc is not present at connector

J115-2 and J115-11, replace WTEC II

cab transmission harness (para 7-86).

(10) Shut down engine (TM 9-2320-365-10).