TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
TM 9-2320-365-20-2
2-1101
2-1101
2-1101
2-1101
2-1101
VOLTAGE TEST
Remove rings, bracelets, watches,
necklaces, and any other jewelry
before working around vehicle.
Jewelry can catch on equipment
and cause injury or short across
electrical circuit and cause severe
burns or electrical shock.
WARNING
(1)
Disconnect connector P173 from connector
J173.
(2)
Set multimeter to volts dc.
(3)
Connect positive (+) probe of multimeter to
connector P173C.
(4)
Connect negative (-) probe of multimeter to
ground.
(5)
Position main light switch to SER DRIVE
(TM 9-2320-365-10) and note reading on
multimeter.
(6)
If 12 vdc is not present, repair or replace
wire 2040 between connector J173 and
connector splice (para 2-40).
(7)
Position main light switch to OFF
(TM 9-2320-365-10).