TM-9-2320-365-20-2

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 2 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-2 - Page 579 of 1432

(1)

Remove kick panel (para 16-3).

(2)

Disconnect connector clamp from

connector P115.

(3)

Disconnect connector P115 from WTEC III

transmission ECU.

(4)

Set multimeter to ohms.

(5)

Connect positive (+) probe of multimeter

to connector P115-1.

(6)

Connect negative (-) probe of multimeter to

all other sockets in connector P115

except P115-16), one at a time, and note

reading on multimeter.

(7)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

(8)

Connect positive (+) probe of multimeter

to connector P115-16.

(9)

Connect negative (-) probe of multimeter to

all other sockets in connector P115

(except P115-1), one at a time, and note

reading on multimeter.

(10)

Connect negative (-) probe of multimeter to

ground and note reading on multimeter.

CONTINUITY TEST

Change 1

2-1583

TM 9-2320-365-20-2

(11)

If continuity is present repair wire 136

(para 2-40) or replace WTEC III dashboard

cable assembly (para 7-11).