TM
TM 9-2320-365-20-3
9-2320-365-20-3
NOTE
Left and right grommets and sleeves are
removed the same way. Right side shown.
(6) Remove two grommets (10) and sleeve (11) from frame
bracket (6).
b. Disassembly.
NOTE
Left
and
right
bracket
assemblies
are
removed the same way. Right side shown.
(1) Remove four self-locking nuts (1), screws (2), and two
bracket assemblies (3) from brackets (4). Discard self-
locking nut.
(2) Remove bracket (4) from resilient mount (5).
(3) Remove resilient mount (5) from rear stabilizer bar (6).
(4) Perform steps (1) through (3) on left side bracket
assembly.
c. Inspection.
NOTE
• If axle brackets fail visual inspection, notify DS
Maintenance.
• Replace any part that fails visual inspection.
• Perform step (1) on both sides of vehicle.
(1) Inspect axle brackets (1) and welds around axle brackets
for cracks and corrosion.
15-9
15-9