TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 1031 of 1268

TM 9-2320-365-20-3

Change 2

15-2.3/(15-2.4 Blank)

g.

Front Leaf Spring Resilient Mount Removal

(1) Install C-Clamp on leaf spring (1).

(2) Remove resilient mount (2) and spacer (3) from bolt (4).

h. Front Leaf Spring Resilient Mount Installation

(1)

Install C-Clamp on leaf spring (1).

(2)

Apply sealing compound to threads of bolt (2).

(3)

Position spacer (3) and resilient mount (4) on

bolt (2).

(4)

Tighten resilient mount (4) 1 ½ turns after contact

with plate (5)

(5)

Remove C-Clamp from leaf spring (1).

WARNING

WARNING

Use care when removing resilient mount

from leaf spring.

Spring is under

tension and can act as a projectile if

released.

Failure to comply may result

in injury to personnel or damage to

equipment,

NOTE

If vehicle has resilient mounts

attached with screws and washers,

notify DS to install four kits P/N

57K2003 on vehicle.

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing.

Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water.

Failure to comply may result in injury to

personnel.

NOTE

If vehicle has resilient mounts attached

with screws and washers, notify DS to

install four kits P/N 57K2003 on vehicle.