TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 117 of 1268

TM 9-2320-365-20-3

4-16. THROTTLE POSITION SENSOR (TPS) CABLE ASSEMBLY REPLACEMENT

This task covers:

a. Removal

b. Installation

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-48).

Cab raised (TM 9-2320-365-10).

Tools and Special Tools

Tool Kit, Genl Mech (Item 44, Appendix C)

Materials/Parts

Pin, Cotter (Item 202, Appendix G)

a. Removal.

(1) Disconnect electrical connector (1) from TPS cable

assembly (2).

(2) Remove three nuts (3), washers (4), screws (5), and

TPS cable assembly (2) from bracket (6).

(3) Remove cotter pin (7) and washer (8) from stud (9).

Discard cotter pin.

(4) Remove TPS cable assembly (2) from stud (9).

(5) Release latch (10) on clamp (11).

(6) Remove TPS cable assembly (2) from clamp (11).

(7) Remove TPS cable assembly (2) from engine.

4-85