TM 9-2320-365-20-3
4-18. THROTTLE CONTROL CABLE REPLACEMENT/ADJUSTMENT (CONT)
(5) Position grommet (8) and throttle control cable (1) in cab
(9).
(6) Lower cab (TM 9-2320-365-10).
(7) Position throttle control cable (1) in dashboard (10) with
two washers (11) and nuts (12).
(8) Install throttle control cable (1) on stud (13) with clip (14).
(9) Apply grease to stud (15).
WARNING
Retaining rings are under tension and can
act as projectiles when released causing
severe
eye
injury.
Use
care
when
installing retaining rings.
Failure to
comply may result in injury to personnel.
(10) Install bellcrank (16) on stud (15) with retaining ring (17).
4-92