TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 245 of 1268

TM 9-2320-365-20-3

Change 2

7-7

(10) Apply electrical tape to terminal lug TL110 (17).

(10.1) Remove self-locking nut (14) and washer (15) from

voltage regulator (16).

(11) Position terminal lug TL110 (17), washer (15), and

self-locking nut (14) on voltage regulator (16).

(12) Tighten self-locking nut (14) to 20-lb-in. (3 N

•

m).

(13) Position dust boot (18) on terminal lug TL110 (17).

(14) Remove self-locking nut (19) and washer (20) from

voltage regulator (16).

(15) Position terminal lug TL35 (21), washer (20), and

self-locking nut (19) on voltage regulator (16).

(16) Tighten self-locking nut (19) to 25 lb-in. (3 N

•

m).

(17) Position dust boot (22) on terminal lug TL35 (21).

(18) Remove self-locking nut (23), washer (24), and two

washers (25) from alternator (3).

(19) Position two washers (25) terminal lugs TL6 (26) and

TL2 (27), washer (24), and self-locking nut (23) on

alternator (3).

(20) Tighten self-locking nut (23) to 80 lb-in. (9 N

•

m).

(21) Position dust boot (28) on terminal lug TL2 (27).

(22) Position clamp (29), washer (30), and screw (31) on

alternator (3).

(23) Tighten screw (31) to 80 lb-in. (9 N

•

m).

NOTE

•

Perform step (10) if replacing alternator

P/N N1506-1 (12420852) with alternator

P/N N1509-1 (12422863).

•

Install plastic cable ties as required to

terminal lug TL110 and tie wire away from

alternator.

NOTE

Perform steps (10.1) through (13) on alternator

P/N N1506-1 (12420852).