TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 258 of 1268

TM 9-2320-365-20-3

7-20

Change 2

7-5.

100 AMP VOLTAGE REGULATOR REPLACEMENT (CONT)

(5)

Apply electrical tape to terminal lug TL110 (6).

(5.1) Cut terminal lug TL110 (6) from engine control cable

assembly wire (6.1)

(6)

Remove dust boot (7) from engine control cable

assembly wire (6.1).

(7)

Apply electrical tape to engine control cable

assembly wire (6.1) so wire doesn’t interfere with

engine or alternator operations.

(8)

Position terminal lug TL35 (10) on voltage regulator

(2) with washer (11), and self-locking nut (12).

(9)

Tighten self-locking nut (12) to 25 lb-in. (3 N

m).

(10) Position dust boot (13) on terminal lug TL35 (10).

c. Follow-On Maintenance

(1)

Lower cab (TM 9-2320-365-10).

(2)

Connect batteries (para 7-48).

(3)

Start engine (TM 9-2320-365-10).

(4)

Check VOLTS gage for charge indication (TM 9-2320-

365-10).

(5)

Shut down engine (TM 9-2320-365-10).

End of Task.

NOTE

•

Perform step (5) if replacing alternator

P/N N1506-1 (12420852) with alternator

P/N N1509-1 (12422863).

•

Install plastic cable ties to terminal lug

TL110 and tie wire away from alternator.

NOTE

Perform steps (5.1) through (7) on alternator

N1506-1 (12420852).