TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 264 of 1268

TM 9-2320-365-20-3

7-7. STARTING MOTOR REPLACEMENT (CONT)

(5) Remove adhesive, nut (8), terminal lugs TL25 (9), TL46

(10), ground strap (11), and terminal lug TL53 (12) from

starting motor terminal (13).

(6) Position nut (8) on starting motor terminal (13).

NOTE

Perform step (7) on vehicles that have not

had connector P81 removed.

(7) Disconnect connector P81 (14) from starting motor

connector (15).

(8) Remove screw (16) from starting motor (17). Discard

screw.

WARNING

Starting motor weighs approximately 60

lbs (27 kgs).

Attach a suitable lifting

device prior to removal. Failure to comply

may result in injury to personnel or

damage to equipment.

NOTE

Step (9) requires the aid of an assistant.

(9) Remove two screws (18) and starting motor (17) from

flywheel housing (19). Discard screws.

(10) Remove gasket (20) from starting motor (17). Discard

gasket.

7-26

Change 1