TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 345 of 1268

TM 9-2320-365-20-3

(12) Connect

vacuum

hose

(24)

to

AIR

FILTER

RESTRICTION GAUGE (25).

NOTE

• Vehicle serial numbers 0002 through 0017, 0019

through 0025, 0027 through 0031, 0033 through

0038, 0040 and 0041, 0043 through 0053, 0055

through 0089, 0091 through 0254, 0256 through

0258, 0260, 0261, 0263 through 2400, and 2402

through 3091 are not equipped with LAMP

TEST switch.

• Vehicle serial numbers 0001 through 1477 were

originally

equipped

with

dashboard

cable

assemblies containing two unused connectors

for LAMP TEST switch. Vehicle serial numbers

1478 through 3091 were originally equipped with

dashboard cable assemblies without connectors

for LAMP TEST switch.

• All rocker switches are connected the same

way.

Hazard lights switch shown.

Refer to

Table 7-2.

Rocker Switch Connectors

for

correct combinations of rocker switches and

connectors.

(13) Connect connector (26) to hazard lights switch (27).

(14) Connect connector (28) to hazard lights switch (27).

(15) Perform steps (13) and (14) on remaining rocker

switches.

NOTE

All electrical gages are connected the same

way.

OIL PRESS gage shown.

Refer to

Table 7-1.2 Electrical Gages Connectors

for

correct

combinations

of

gages

and

connectors.

(16) Connect connector (29) to OIL PRESS gage connector

(30).

(17) Install connector clamp (31) on OIL PRESS gage

connector (30).

(18) Perform steps (16) and (17) on remaining electrical

gages.

(19) Connect connector PX7 (32) to lighted indicator display

(33).

Change 1

7-103