TM 9-2320-365-20-3
7-15. INSTRUMENT PANEL ASSEMBLY REPLACEMENT/REPAIR (CONT)
NOTE
• All electrical gages are removed the same way.
FUEL gage shown.
• Note position of electrical gages prior to
removal.
(4) Remove two protective caps (4), self-locking nuts (5),
retaining ring (6), and FUEL gage (7) from instrument
panel (3). Discard self-locking nuts.
(5) Perform step (4) on remaining electrical gages.
NOTE
Perform steps (6) and (7) on vehicles
equipped with WTEC II transmission controls.
(6) Remove two screws (8) and washers (9) from mounting
bracket (10).
(7) Remove four screws (11), mounting bracket (10), three
clip nuts (12), and WTEC II TEPSS (13) from instrument
panel (3).
NOTE
Perform steps (8) and (9) on vehicles
equipped
with
WTEC
III
transmission
controls.
(8) Remove two nuts (14) and brackets (15) from WTEC III
TPSS (16).
(9) Remove WTEC III TPSS (16) from instrument panel (3).
7-94