TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 428 of 1268

TM 9-2320-365-20-3

7-184

Change 2

7-45.

BATTERY TESTER REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Battery box cover removed (TM 9-2320-365-10).

Tools and Special Tools

Goggles, Industrial (Item 15, Appendix C)

Apron, Rubber (Item 3, Appendix C)

Gloves, Rubber (Item 13, Appendix C)

Puller, Battery Terminal (Item 28, Appendix C)

Tool Kit, Genl Mech (Item 44, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape (Item

21, Appendix D)

Grease, Automotive and Artillery (GAA)

(Item 23, Appendix D)

Lockwasher (Item 78, Appendix G)

a.

Removal.

(1)

Remove nut (1) and lockwasher (2) from battery

ground cable (3).

Discard lockwasher.

(2)

Deleted.

(3)

Remove terminal lugs TL50A (5), TL48 (6), and

battery tester terminal lug (7) from battery ground

cable (3).

WARNING

•

Remove rings, bracelets, watches, necklaces, and any other jewelry before working around

vehicle.

Jewelry can catch on equipment and cause injury or short across electrical circuit

and cause severe burns or electrical shock.

Batteries can explode from a spark.

Battery acid

is harmful to skin and eyes.

Always wear eye protection when working with batteries.

•

Negative battery terminals must be disconnected first.

Failure to comply may result in

serious injury or death to personnel.

NOTE

Tag cables and connection points prior to

disconnecting.