TM 9-2320-365-20-3
Change 2
7-185
(4)
Loosen two terminal screws (8) on battery ground
cable (3).
(5)
Remove battery ground cable (3) from battery
terminals BT4 E2 (9) and BT3 E2 (10).
(6) Remove nut (11) from battery 24 VDC cable (12).
(7) Deleted.
(8) Remove terminal lug TL49A (14) and battery tester
terminal lug (15) from battery 24 VDC cable (12).
(9)
Remove screw (16) and clamp (17) from battery
hold-down bracket (18).
(10) Remove battery tester (19) from spring clip (20).
(11) Remove two screws (21) and spring clip (20) from
battery hold-down bracket (18).
NOTE
Remove battery terminal covers as
required.