TM 9-2320-365-20-3
Change 2
7-286.1/(7-286.2 Blank)
(10.1)Install dust boot (21) on engine control cable
assembly (1).
(11) Position terminal lug TL110 (20) on voltage regulator
(22) with washer (23) and self-locking nut (24).
(12) Tighten self-locking nut (24) to 25 lb-in. (3 N
•
m).
(13) Position dust boot (21) on terminal lug TL110 (20).
(14) Install dust boot (25) on engine control cable
assembly (1).
(15) Position terminal lug TL35 (26) on voltage regulator
(22) with washer (27) and self-locking nut (28).
(16) Tighten self-locking nut (28) to 25 lb-in. (3 N
•
m).
(17) Position dust boot (25) on terminal lug TL35 (26).
NOTE
Perform step (10.1) through (13) on alternator
N1506-1 (12420852).