TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 579 of 1268

TM 9-2320-365-20-3

7-78. REAR INTERVEHICULAR 12 VDC (7 PIN) CABLE REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Batteries disconnected (para 7-48).

Tools and Special Tools

Tool Kit, Genl Mech (Item 44, Appendix C)

Goggles, Industrial (Item 15, Appendix C)

Materials/Parts

Ties, Cable, Plastic (Item 76, Appendix D)

Nut, Self-Locking (2) (Item 116, Appendix G)

WARNING

Wear appropriate eye protection when

working

under

vehicle

due

to

the

possibility of falling debris.

Failure to

comply may result in injury to personnel.

a. Removal.

NOTE

Remove plastic cable ties as required.

(1) Disconnect connector J52 (1) from connector P52R (2).

(2) Remove two self-locking nuts (3), screws (4), washers

(5), and rear intervehicular 12 vdc (7 pin) cable (6) from

vehicle. Discard self-locking nuts.

Change 1

7-327