TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006
CHANGE 3

  TM-9-2320-365-20-3 - Page 581 of 1268

TM 9-2320-365-20-3
Change 2
7-329
7-79.
REAR INTERVEHICULAR 24 VDC (12 Pin) CABLE REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Batteries disconnected (para 7-48).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Goggles, Industrial (Item 15, Appendix C)
Materials/Parts
Ties, Cable, Plastic (Item 76, Appendix D)
Lockwasher (4) (Item 102.2, Appendix G).
a. Removal.
(1)
Disconnect connector J53 (1) from connector P53R
(2).
(2)
Remove four nuts (3), lockwashers (4), screws (5),
and rear intervehicular 24 vdc cable (6) from
vehicle. Discard self-locking nuts.
b. Installation.
(1)
Install rear intervehicular 24 vdc cable (6) on
vehicle with four screws (5), lockwashers (4),
and nuts (3).
(2)
Connect connector J53 (1) to connector P53R (2).
c. Follow-On Maintenance.
Connect batteries (para 7-48).
End of Task.
WARNING
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
NOTE
Note position of cover hinge and cable
key prior to removal.
Remove plastic cable ties as required.
NOTE
Cover will hinge and cable keying will be
at 12 o’clock position.
Install plastic cable ties as required.


Back to Top