TM-9-2320-365-20-3
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-3 - Page 624 of 1268
TM 9-2320-365-20-3
7-86. WTEC II CAB TRANSMISSION HARNESS REPLACEMENT
This task covers:
a. Removal
b. Installation
c. Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Instrument panel assembly removed for access (para
7-15).
Kick panel removed (para 16-3).
Personnel heater removed (para 18-9).
Tools and Special Tools
Tool Kit, Genl Mech (Item 44, Appendix C)
Materials/Parts
Dispenser, Pressure Sensitive Adhesive Tape
(Item 21, Appendix D)
Lockwasher (4) (Item 67, Appendix G)
Gasket (Item 24, Appendix G)
Personnel Required
(2)
a. Removal.
NOTE
Tag wires and connection points prior to
disconnecting.
(1) Remove screw (1), washer (2), and ground terminal lug
(3) from WTEC II TEPSS (4).
(2) Disconnect connector J115 (5) from WTEC II TEPSS (4).
(3) Disconnect connector J114 (6) from WTEC II TEPSS (4).
(4) Disconnect connector J118 (7) from connector P118 (8).
7-370
Back to Top
