TM-9-2320-365-20-3

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-3 - Page 630 of 1268

TM 9-2320-365-20-3

7-87. WTEC III CAB TRANSMISSION HARNESS REPLACEMENT

This task covers:

a. Removal

b. Installation

c. Follow-On Maintenance

INITIAL SETUP

Equipment Conditions

Instrument panel assembly removed for access (para 7-

15).

Kick panel removed (para 16-3)

Personnel heater removed (para 18-9).

Tools and Special Tools

Tool Kit, Genl Mech (Item 44, Appendix C)

Materials/Parts

Dispenser, Pressure Sensitive Adhesive Tape

(Item 21, Appendix D)

Ties, Cable, Plastic (Item 76, Appendix D)

Lockwasher (4) (Item 67, Appendix G)

Gasket (Item 24, Appendix G)

Personnel Required

(2)

a. Removal.

NOTE

• Remove plastic cable ties as required.

• Note routing of WTEC III cab transmission

harness prior to removal.

• Tag connectors and connection points prior to

disconnecting.

(1) Disconnect connector P119 (1) from connector J119 (2).

NOTE

Step (2) requires the aid of an assistant.

(2) Remove four nuts (3), lockwashers (4), screws (5),

gasket (6), and connector J119 (2) from cab (7). Discard

lockwashers and gasket.

7-376