TM-9-2320-365-20-3
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-3 - Page 67 of 1268
TM 9-2320-365-20-3
NOTE
Inner and outer charge air cooler to air inlet
elbow tubes are installed the same way.
Outer charge air cooler to air inlet elbow tube
shown.
(9) Position hose (19) on charge air cooler (20) with three
clamps (21).
(10) Position charge air cooler to air inlet elbow tube (2) in
hose (19).
CAUTION
Clamps at charge air cooler end of charge air
cooler to air inlet elbow tube must be
oriented with screw vertical.
Failure to
comply will cause interference with bottom of
cab.
(11) Tighten three clamps (21) to 90-100 lb-in. (7-8 N·m).
CAUTION
All clamps on engine air intake path must be
positioned and tightened correctly.
Failure to
comply may allow foreign matter into engine air
intake and result in engine failure.
(12) Position hose (1) on air inlet elbow (5) with clamp (22).
(13) Tighten clamps (3 and 22) to 90-100 lb-in. (7-18 N·m).
4-35
Back to Top
