TM-9-2320-365-20-3
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 3 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-3 - Page 676 of 1268
TM 9-2320-365-20-3
8-32
Change 2
8-9.
TRANSMISSION OIL FILTER REPLACEMENT
This task covers:
a. Removal
b. Installation
c.
Follow-On Maintenance
INITIAL SETUP
Equipment Conditions
Engine shut down (TM 9-2320-365-10).
Tools and Special Tools
Goggles, Industrial (Item 15, Appendix C)
Container (60 qt (57 L) capacity)
Tool Kit, Genl Mech (Item 44, Appendix C)
Wrench, Torque, 0-175 lb-ft (Item 57,
Appendix C)
Materials/Parts
Oil, Lubricating, OE/HDO 15W40 (Item 46, Appendix D)
Kit, Filter (Item 55, Appendix G)
Screw, Cap (4) (Item 237.1, Appendix G)
a.
Removal.
(1)
Position container under transmission control valve
module (1).
(2)
Remove drain plug (2) from transmission control
valve module (1) and drain oil.
WARNING
CAUTION
•
Wear appropriate eye protection when
working under vehicle due to the
possibility of falling debris.
Failure to
comply may result in injury to personnel.
•
Ensure exhaust system is cool before
performing maintenance.
Failure to
comply may result in injury to personnel
There are two transmission oil filters.
Do
not replace one transmission oil filter
without replacing the other.
Failure to
comply may result in damage to
equipment.
Back to Top
