TM-9-2320-365-20-4

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-4 - Page 103 of 968

TM 9-2320-365-20-4

b. Installation.

NOTE

Step (1) requires the aid of an assistant.

(1) Position rear cab support (1) on vehicle.

NOTE

• Left and right sides of rear cab support are

installed the same way. Right side shown.

• Order rubber plugs PN 12420305-027 if vehicle

was not originally equipped with them.

(2) Install rubber plug (2) on rear cab support (1).

(3) Position four screws (3) and self-locking nuts (4) in rear

cab support (1).

NOTE

Step (4) requires the aid of an assistant.

(4) Tighten four self-locking nuts (4) to 45-61 lb-ft (61-83

N·m).

(5)

Perform steps (2) through (4) on left side of rear cab support.

(6) Position cab leveling valve linkage (5) on rear cab

support (1) with self-locking nut (6).

(7) Tighten self-locking nut (6) to 84-102 lb-in. (9-12 N·m).

(8) Install three cable clamps (7) on cab support (1) with

screws (8).

Change 1

16-62.1/(16-62.2 Blank)