TM 9-2320-365-20-4
16-58
Change 2
16-6.
M1081 DOOR REPAIR/ADJUSTMENT (CONT)
(12) Install door arrestor assembly (14) on cab with
washer (15), two spring washers (16), and screw
(17).
(13) Install door arrestor assembly (14) on bottom of
door (7) with two screws (18).
i.
Door Adjustment.
(1)
Support door (1) and loosen six screws (2) on bottom
hinge (3) and top hinge (4).
(2)
Adjust door (1) so that gap between door (1) and cab
is approximately equal all around.
(3) Open, close, and open door (1) to ensure correct
operation.
(4) Tighten six screws (2) on top hinge (4) and bottom
hinge (3) to 22-26 lb-ft (30-35 N
•
m).
NOTE
•
Steps (1) through (4) require the aid of an
assistant.
•
Loosen door hinge screws only enough to
allow small adjusting movements of door.
NOTE
Hold door in Place while screws are
tightened.