TM-9-2320-365-20-4

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-4 - Page 219 of 968

TM 9-2320-365-20-4

16-29. M1079 RUBBER BUMPER AND TEE LATCH REPLACEMENT

This task covers:

a. Rubber Bumper Removal

b. Rubber Bumper Installation

c. Tee Latch Removal

d. Tee Latch Installation

INITIAL SETUP

Equipment Conditions

Engine shut down (TM 9-2320-365-10).

Tools and Special Tools

Tool Kit, Genl Mech (Item 44, Appendix C)

Materials/Parts

Lockwasher (Item 81, Appendix G)

Lockwasher (4) (Item 77, Appendix G)

Sealing Compound (Item 67, Appendix D)

a. Rubber Bumper Removal.

NOTE

Left and right side rubber bumpers are

removed the same way. Left side shown.

(1) Remove screw (1), lockwasher (2), rubber bumper (3),

and spacer (4) from van body (5). Discard lock-washer.

(2) Remove sealing compound from van body (5).

b. Rubber Bumper Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

(1) Apply sealing compound to van body (5).

(2) Install spacer (4) and rubber bumper (3) on van body (5)

with lockwasher (2) and screw (1).

16-171