TM-9-2320-365-20-4

M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)

TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 4 OF 5

FEBRUARY 2006

CHANGE 3

TM-9-2320-365-20-4 - Page 220 of 968

TM 9-2320-365-20-4

16-29. M1079 RUBBER BUMPER AND TEE LATCH REPLACEMENT (CONT)

c. Tee Latch Removal.

NOTE

Left and right side tee latches are removed

the same way. Left side shown.

(1) Remove sealing compound from edges of tee latch (1)

and heads of four screws (2).

(2) Remove four screws (2), lockwashers (3), washers (4),

and tee latch (1) from van body (5).

Discard

lockwashers.

(3) Remove sealing compound from van body (5) and tee

latch (1).

d. Tee Latch Installation.

WARNING

Adhesives,

solvents,

and

sealing

compounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

If

adhesive, solvent, or sealing compound

gets

on

skin

or

clothing,

wash

immediately with soap and water. Failure

to

comply

may

result

in

injury

to

personnel.

NOTE

Left and right side tee latches are installed

the same way. Left side shown.

(1) Apply sealing compound on tee latch (1).

(2) Install tee latch (1) on van body (5) with four washers

(4), lockwashers (3), and screws (2).

(3) Apply sealing compound on edges of tee latch (1) and

heads of screws (2).

End of Task.

16-172