TM-9-2320-365-20-5
M1078 SERIES, 2 1/2-TON, 4 X 4, LIGHT MEDIUM TACTICAL VEHICLES (LMTV)
TECHNICAL MANUAL; MAINTENANCE INSTRUCTIONS; UNIT MAINTENANCE; VOLUME NO. 5 OF 5
FEBRUARY 2006
CHANGE 3
TM-9-2320-365-20-5 - Page 214 of 666
TM 9-2320-365-20-5
20-64. BATTERY TO 200 AMP TERMINAL BLOCK 24 VDC CABLE ASSEMBLY
REPLACEMENT (CONT)
(2) Loosen clamp (5) on turbocharger intake hose (6).
(3) Remove turbocharger intake hose (6) from intake air
cleaner boot (7).
(4) Remove nut (8), lockwasher (9), washer (10), and two
terminal lugs TL37 (11) and TL36 (12) from terminal
block (13). Discard lockwasher.
NOTE
Remove plastic cable ties as required.
(5) Remove battery to 200 amp terminal block 24 vdc cable
(14) from vehicle.
b. Installation.
NOTE
Install plastic cable ties as required.
(1) Position battery to 200 amp terminal block 24 vdc cable
assembly (1) on vehicle.
(2) Position terminal lugs TL36 (2) and TL37 (3) on terminal
block (4) with washer (5), lockwasher (6), and nut (7).
(3) Tighten nut (7) to 15-19 lb-ft (21-25 N·m).
20-384
Back to Top
